Forum Discussion
Cirrusfellow traffic
Najm You should be able using the following iRule.
when CLIENT_ACCEPTED priority 500 { log local0. "[virtual] - client ip=[IP::client_addr]:[TCP::client_port]" }Alternatively, if you needed to see it right then in the CLI you can look at the connection table and look at the client_addr section to see the true client IP. The following page should provide additional information to assist you.
To check traffic hits on a specific Virtual Server (VS) in Citrix ADC through the CLI, use the command: `nsconmsg -K /var/nslog/newnslog -d stats -g service -c showstats | grep "<VS_NAME>"`. Analyze the output for hit count details.
MVPNajm You should be able using the following iRule.
when CLIENT_ACCEPTED priority 500 {
log local0. "[virtual] - client ip=[IP::client_addr]:[TCP::client_port]"
}Alternatively, if you needed to see it right then in the CLI you can look at the connection table and look at the client_addr section to see the true client IP. The following page should provide additional information to assist you.
