F5 provisioning

We didn't have enough space to provision the ASM and AVR modules on our F5 (BIG-IP v13.1.1.4) and increasing the partition /appdata with the following command solved it:

"tmsh modify /sys disk directory /appdata new-size <new-size>" (see the KB Extending disk space on BIG-IP VE: https://support.f5.com/csp/article/K14952).

F5 uses LVM, so "df -h" is not the command you are looking for.

Try to check the free space using

# vgs

If you need more space you should increase the size of the disk in the hypervisor and reboot the box.

Removing some installation old volumes is also a good point to free space.

https://support.f5.com/csp/article/K33265170

If you need to increase the space of an specific partition, you should resize it using this procedure

https://support.f5.com/csp/article/K14952

KR,

Dario.

I have tried resizing this by using the command: modify /sys disk logical-disk <storage name> vg-reserved <new size> but nothing is working ...

Would this article help me : https://support.f5.com/csp/article/K14843

I am using Vmware esxi 6.5

Go into the settings of VMWare Player (I presume that's what you're using) and review both partitions. I currently have the first partition at 82GB and the other at 20GB. ASM requires 20GB to run.

[root@waf:Active:Standalone] config # df -h

Filesystem                            Size Used Avail Use% Mounted on

/dev/mapper/vg--db--vda-set.1.root    419M  77M 316M 20% /

devtmpfs                              4.3G 4.0K 4.3G  1% /dev

tmpfs                                 4.3G 2.3M 4.3G  1% /dev/shm

tmpfs                                 4.3G 2.3M 4.3G  1% /run

tmpfs                                 4.3G    0 4.3G  0% /sys/fs/cgroup

/dev/mapper/vg--db--vda-set.1._usr    5.0G 4.0G 738M 85% /usr

/dev/mapper/vg--db--vda-dat.share     477M 100M 348M 23% /shared

none                                  4.3G  45M 4.3G  2% /shared/rrd.1.2

/dev/mapper/vg--db--vda-dat.appdata    31M 4.5M  25M 16% /appdata

/dev/mapper/vg--db--vda-set.1._config 469M  15M 426M  4% /config

/dev/mapper/vg--db--vda-set.1._var    922M 355M 504M 42% /var

prompt                                4.0M  28K 4.0M  1% /var/prompt

none                                  4.3G  17M 4.3G  1% /var/tmstat

/dev/mapper/vg--db--vda-dat.log       477M  62M 386M 14% /var/log

none                                  4.3G    0 4.3G  0% /var/loipc

tmpfs                                 878M    0 878M  0% /run/user/91

tmpfs                                 878M    0 878M  0% /run/user/0

The VM should have 2 partitions. What are the sizes of each?

I have increased to 130 GB and it is still complaining

Yes. it was 60 GB and increased it to 93 GB .. Would increasing it more make a difference